1984-2007 Honda CR85R, CR80R, CR125R, CR250R General Spcifications & Service Manual Download Link


General Specifications

1

SERVICE MANUAL DOWNLOADS
Always refer to your service manual before attempting to do any work on your motorcycle, important data including procedures, diagrams, specifications cleaning & maintenance information will help you care for and lower the chances of premature parts failurer. Below is a great source for service manuals available for instant download straight to your computers in just seconds.
1
All manuals are simple to use pdf downloads and are delivered straight to your computer in just seconds. Not sure what a pdf is? Here is a sample of what a  Service Manual looks like (sample is restricted to one page only).
 
HONDA CR125/CR125R SERVICE MANUALS
HONDA CR250/250R SERVICE MANUALS
HONDA CR80/85R SERVICE MANUALS
 

MODEL/YEAR APPLICATION:

Honda CR125R, CR125-R, CR-125-R, CR125 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 & 2007 models.

Honda CR250R, CR250, CR-250R, CR250-R 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06 & 07 year CR250R models.

Honda  CR80R, CR85R, CR80, CR85, CR-80-R, CR-85-R 1984, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06 & 07 year CR-80/85-R models.


It is only recommended to follow the factory service guide in the service manuals listed above when working on your motorcycle as these they contain the same information mechanics and technicians use to service your bike.

Important information not contained in this page like special notes, tips, proper procedures, complete specifications, torque specs, additional torque specs and recommendations must be followed in the instant download manual to ensure that the vehicle is in peak operating condition.


GENERAL SPECIFICATIONS

SPECIFICATIONS MAINTENANCE

SPECIFICATIONS TIGHTENING TORQUES

LUBRICATION DIAGRAMS

CABLE ROUTING DIAGRAM

 


RELATED SEARCHES:

Minimum ground clearance 375 mm (14.76 in) 377 mm (14.84 in) 376 mm (14.80 in)

Weight:

With oil and fuel 102.0 kg (224.9 lb)

Engine:

Engine type Liquid cooled 4-stroke, DOHC

Cylinder arrangement Single cylinder, forward inclined

Displacement 250 cm

Bore × stroke 77.0 × 53.6 mm (3.03 × 2.11 in)

Compression ratio 13.5 : 1

Starting system Kickstarter

Lubrication system: Dry sump

Oil type or grade:

Engine oil Recommended brand: YAMALUBE

SAE10W-30, SAE10W-40, SAE10W-50

SAE15W-40, SAE20W-40 or SAE20W-50

API service SG type or higher,

JASO standard MA

Oil capacity:

Engine oil

Periodic oil change 0.95 L (0.84 Imp qt, 1.00 US qt)

With oil filter replacement 1.05 L (0.92 Imp qt, 1.11 US qt)

Total amount 1.20 L (1.06 Imp qt, 1.27 US qt)

Coolant capacity (including all routes): 1.00 L (0.88 Imp qt, 1.06 US qt)

Air filter: Wet type element

Fuel:

Type Premium unleaded gasoline only with a research octane

number of 95 or higher.

Tank capacity 6.4 L (1.4 Imp gal, 1.69 US gal)

Carburetor:

Type FCR-MX37

Manufacturer KEIHIN

Spark plug:

Type/manufacturer CR8E/NGK (resistance type)

Gap 0.7–0.8 mm (0.028–0.031 in)

Clutch type: Wet, multiple-disc

Transmission: USA, CDN EUROPE, AUS, NZ, ZA

Primary reduction system Gear

Primary reduction ratio 57/17 (3.353)

Secondary reduction system Chain drive

Secondary reduction ratio 49/13 (3.769) 51/13 (3.923)

Transmission type Constant mesh, 5-speed

Operation Left foot operation

Gear ratio:

1st 30/14 (2.143)

2nd 28/16 (1.750)

3rd 26/18 (1.444)

4th 22/18 (1.222)

5th 25/24 (1.042)

Chassis: USA, CDN EUROPE AUS, NZ, ZA

Frame type Bilateral beam

← ←

Caster angle 27.5° 27.2° 27.4°

Trail 120.2 mm (4.73

in)

117.4 mm (4.62

in)

119.6 mm (4.71

in)

Tire:

Type With tube

Size (front) 80/100-21 51M

Size (rear) 100/90-19 57M

Tire pressure (front and rear) 100 kPa (1.0 kgf/cm

Brake:

Front brake type Single disc brake

Operation Right hand operation

Rear brake type Single disc brake

Operation Right foot operation

Suspension:

Front suspension Telescopic fork

Rear suspension Swingarm (link type monocross suspension)

Shock absorber:

Front shock absorber Coil spring/oil damper

Rear shock absorber Coil spring/gas, oil damper

Wheel travel: USA, CDN EUROPE, AUS, NZ, ZA

Front wheel travel 300 mm (11.8 in)

2, 15 psi)

Rear wheel travel 307 mm (12.1 in) 310 mm (12.2 in)

Electrical:

Ignition system CDI magneto

3 (8.80 Imp oz, 8.45 US oz)

 


Exhaust system Silencer to rear frame

Engine mounting Frame to engine

Engine bracket to engine

Engine bracket to frame

Steering Steering stem to handlebar Steering stem to frame

Steering stem to upper bracket

Upper bracket to handlebar

Suspension Front Steering stem to front fork Front fork to upper bracket

Front fork to lower bracket

Rear For link type Assembly of links

Link to frame

Link to rear shock absorber

Link to swingarm

Installation of rear shock absorber Rear shock absorber to frame

Installation of swingarm Tightening of pivot shaft

Wheel Installation of wheel Front Tightening of wheel axle

Tightening of axle holder

Rear Tightening of wheel axle

Wheel to rear wheel sprocket

Brake Front Brake caliper to front fork

Brake disc to wheel

Tightening of union bolt

Brake master cylinder to handlebar

Tightening of bleed screw

Tightening of brake hose holder

Rear Brake pedal to frame

Brake disc to wheel

Tightening of union bolt

Brake master cylinder to frame

Tightening of bleed screw

Tightening of brake hose holder

Fuel system Fuel tank to fuel cock

Lubrication system Tightening of oil hose clamp

Specifications, Specs, Spec's, Curb Weight, Weight, HP, Horsepower, Horse Power, Torque